Vadodara, Gujarat 
GST 24AABCS4703Q1Z6
Features Highly efficient helical gear units in 6 frame sizes High output speed, torque up to 830 Nm Gear unit ratios up to i = 8.65 Available in foot- or flange-mounted design Areas of application Roller conveyors Belt conveyors Chain conveyors
Practical teaching aids prepare specialists for the ever-increasing automation of drive technology. In our MCB didactics module, trainees have the opportunity to practice on a real frequency inverter from the MOVITRAC® B series, turning theory into real-life practical experience. Gain practical experience on the industry-standard MOVITRAC® B frequency inverter To make consumer goods widely affordable, manufacturers are continuing to advance the automation of their production plants. As a result, the electronically upgraded machines are becoming increasingly sophisticated. This in turn places ever greater demands on prospective electronics professionals (MT, EBT, EMA, EAT, EAFT, EGS). That is why we offer the frequency inverter module as an electro-mechanical teaching aid. The module helps prospective experts to understand how to switch on and operate AC asynchronous motors electronically and to apply this knowledge. The teaching aid is part of our modular teaching concept and was developed specifically for subject area 8, "Selecting and integrating drives." Real inverter with comprehensive functionality The main benefit: A tried and tested, single-phase frequency inverter from the MOVITRAC® B series forms the electronic core element of the teaching material. Its extensive functionality enables you to put the theory you have learned into practice. The teaching aid provides clear instruction in the control and operation of asynchronous motors from SEW-EURODRIVE and third-party motors. It is freely configurable and enables positioning control via Digital and analog signals PROFIBUS PROFINET Using a higher-level PLC controller, a master-slave situation can also be simulated: The functions for speed and direction control as well as measurement functions are available for this. Depending on requirements, the didactics module is available in two variants: Assembly kit for quick and simple installation Fully equipped module that can automatically trigger an acoustic alarm signal when using and operating a safety blocking device
The compact construction as a planetary gear unit and a primary gear unit is a feature of our industrial gear unit P series. They are used in systems which demand low speeds and a high torque. Space-saving planetary gearmotors for operations with low output speed Process engineering plants which run slowly depend on low output speeds and a high torque. This includes mixers and rotary filters. In addition to these features, users and outfitters of comparable systems demand reliable drive components. With the industrial gear units of the P series you receive powerful and reliable planetary gearmotors which can be supplied at short notice in standardised versions, depending on the size. Thanks to our modular concept, you have access to a comprehensive range of optional equipment. Another feature of the space-saving industrial gear units is the economical price-performance ratio. So you are best-equipped for all applications. Primary gearmotor for more power Industrial planetary gear units of the P series receive powerful support via an upstream gearmotor. Additional components which demand a lot of space and increase costs are thus a thing of the past. This means couplings, intermediate flanges and adapter flanges. You will also find a suitable primary gear motor at SEW???EURODRIVE. Just use the entire range of our gearmotor modular concept and combine for different purposes. Get in touch with us. Our experts understand your industry and its requirements. We have the expertise and the tools to provide optimum advice and support. Your benefits Save on installation spacethrough the short and compact mounting position of the industrial planetary gearmotors. Reduce costsby having an upstream gearmotor and by no longer having cost-intensive couplings, intermediate flanges and adapter flanges. Features Transmission of high torque ratings for powerful movement of large quantities Especially compact design for limited installation space High permitted radial loads Upstream gearmotors in helical version and bevel-helical version which can be combined with the planetary gear unit
Recycle energy and save costs! Simply use the potential energy from the lowering and braking movements of your application. Our MOVIDRIVE® MDR regenerative power supply units take care of the rest, they feed the recovered energy back into the supply system. Is potential energy from lowering and braking movements converted into waste heat in your applications? Put a stop to that! Use our MOVIDRIVE® MDR regenerative power supply units to harness the regenerative energy of your drives. The MOVIDRIVE® MDR regenerative power supply unit acts as a centralised supply and regenerative power supply unit for the connected inverters. They can be used in combination with our MOVIDRIVE® B drive inverters and MOVITRAC® B frequency inverters. Several inverters can be connected to the MOVIDRIVE® MDR in a DC link connection.
The simple way of controlling machine and plant speeds economically: 2-speed motors. We offer pole-changing DR.. series AC motors with a power combination from 0.15 kW / 0.20 kW to 18 kW / 34 kW. With this large selection, you are sure to find the suitable motor for your application.2 speeds with a ratio of 1:2 or 1:4 We supply pole-changing 2-speed AC motors in sizes and designs DR63 and DRS.. as 4/2 and 8/4-pole motors with speeds in a ratio of 1:2 and as 8/2-pole motors with speeds in a ratio of 1:4 (DRS.. only). These motors also come from our modular system – take advantage of its benefits: for example, we offer pole-changing AC motors for countries with a 50 Hz or 60 Hz line frequency, with the required voltage of course. Our pole-changing motors naturally come with all the certifications required by international regulations, so you can use them anywhere in the world, for example in Canada (CAS certification), the USA (UR certification) or in China (CCC certification). We also offer a wide range of additional features so that you can find the perfect drives to match your applications. For example, with three different brake sizes for each motor frame size, you can size the brake to ensure that braking brings the drive to a halt safely and only as fast as necessary. Our range of pole-changing AC motors mean that you can save time and optimise your motor selection, ordering and delivery processes. As a Global Player, we offer you this range of products in 51 countries around the world. Only half the solution without a gear unit? Then you can use our modular system to combine our DR63 and DRS.. series 2-speed pole-changing AC motors with a helical, parallel shaft, worm, bevel or SPIROPLAN® gear unit of your choice. All these gear unit types are already available serially, combined as standard gearmotors.
Standard gearmotors feature an impressive variety of types, the ideal graduation over a multitude of sizes, and the widest range of designs. That makes them an essential heavy-duty drive that is especially suited for production and logistics. Depending on the level of gear unit graduation, they can achieve high torques of up to 50,000 Nm.
Brilliantly simple and simply brilliant: MOVIMOT®, the sleek combination of a gearmotor and a digital frequency inverter with a power range from 0.37 kW to 4.0 kW. Flexible application thanks to the IP54 degree of protection; also available with IP55, IP65 or IP66. Proven products for decentralised drive technology: Gearmotor with inverter Your proven path to decentralised drive technology: MOVIMOT®, a combination of a gearmotor and a digital frequency inverter. Available in all designs and mounting positions of our standard gearmotors, with or without a brake. A gearmotor and a digital frequency inverter matched to your connection voltage with 380 V to 500 V or 200 V to 240 V. MOVIMOT® is the power duo for applications in the power range from 0.37 kW to 4.0 kW. Even with an integrated frequency inverter, MOVIMOT® requires only marginally more installation space than conventional gearmotors.
Our MOVISAFE® DFS..B or DCS..B safety cards ensure functional safety for the drive components in your system – and implement comprehensive motion and position monitoring.Integrated functional safety for your drive and frequency inverters Functional safety is the top priority for every system operation. Our MOVISAFE® DFS..B or DCS..B safety cards are compact and functional safety solutions that are both efficient and provide maximum operating safety. Controlled via PROFIsafe, our safety cards ensure targeted motion and position monitoring and provide you with additional practical functions for the safe operation of your system. Compatibility with all drive components is a key focus. We can provide the following safety cards: MOVISAFE® DFS11B/21B guarantees optimised stop monitoring for all your drive components. This safety card simplifies the planning and implementation of every type of system. MOVISAFE® DCS21B is an innovative safety component that is specifically designed for motion and position monitoring. This safety card can be easily and compactly integrated into the MOVIDRIVE® B drive inverter.
Sew-Eurodrive India Pvt Ltd Plot No 4, Gic , Por, Ramangamadi Vadodara, Gujarat, India, 391243
Manager (Manager)
