Industrial Motors

Range :Standard 3 Phase Induction Motors with rating 0.12 HP to 10 HR are available from frame size 63 to 160 with standard speed and various construction.Standards :Performance conforms to IS:325 and dimensions according to IS:1231 and IS:2223.Ratings :Motors are rated for continues duty type S1 at an ambient of 40° C and site altitudes of up to 1000 M above mean sea level.Voltage and Frequency :Motors designed are for rated voltage of 415V /-6%, 3 Phase, 50 Hz /-3% supply. Motors with special designs of voltage / frequency can be offered on request.Paint : Standard Synthetic enamel paint is provided which is suitable for tropical conditions. However, special paint can be provided on request.Construction : Standard motors with single shaft extension are for horizontal foot mounting (B3 as per IS:1231) and vertical flange/face mounting (B5 & B14 as per IS:2223). Other types of construction as show below can be offered on request.Insulation System : All standard motors are provided with class "B" insulation system. Motors with any other class of Insulation can be offered on request.Degree of Protection : Motors have IP44 degree of protection as a standard feature conforming to IS 4691. Motors can be supplied with protection IP54 as well as IP55 on special request.Cooling & Ventilation : Type of cooling is as per IS 6362. All motors have an external bi-direction centrifugal fan.Terminal Box : All motors are provided with terminal box is on the top of the housing. Terminal box can be rotated in steps of 90°.Noise : Motors are designed for low noise level in accordance with IS 12065.Bearing System : All motors are equipped with pre-lubricated bearing. Regressing facility can be provided on request.Earthing Terminals : Two earthing terminals are provided in all the motors. Both on the stator housing. Terminal can be provided in "T" Box on request.Special Features Available on Request.